0 item(s) Cart is empty
25 Foot Roll of 12" StarCraft Electra Foil - Terra Cotta
StarCraft Electra Foil - Terra Cotta (12" x 25 ft)
Important: Electra Foil does NOT have its own adhesive. You must use a separate heat transfer adhesive, such as our Siser EasyWeed Adhesive or StarCraft Heat Transfer Adhesive.
Create your own dazzling designs with StarCraft Electra Foils. Made from a safe, PVC/phthalate/formaldehyde-free water-based formulation, these foils are designed to be paired with heat transfer adhesive to make your apparel pop. Available in a wide variety of solid colors and patterns, your design options are only limited by your imagination!
Heat Application
- Time: 8-15 seconds
- Temperature: 280-320° F / 137-160° C
- Pressure: Medium-Firm
- Peel: COLD
Care Instructions
- Wait 24 hours before first wash
- Machine wash COLD with mild detergent
- Wash inside out
- Do not dry clean; No chlorine bleach
Video Tutorial
How to Apply StarCraft Electra Foil
Because Electra Foil requires a two-step process, watch the tutorial above or follow the written instructions to achieve a perfect, dazzling finish.
- Cut & Weed the Adhesive: Cut your design in reverse (mirrored) on your Heat Transfer Adhesive (e.g., Siser EasyWeed Adhesive), just like standard HTV. Weed away the excess material.
- Tack the Adhesive: Place the adhesive on your garment. Press for just 2 to 3 seconds at 280-320° F to tack it down. Peel the clear carrier sheet HOT.
- Place the Foil: Cut a piece of Electra Foil slightly larger than your design. Place it over the exposed adhesive with the color side facing UP. Cover with a heat transfer cover sheet or multipurpose paper.
- Final Press: Press for 8-15 seconds at 280-320° F using Medium-Firm pressure.
- Cold Peel: Remove the garment from the press and let it cool completely to room temperature. Once entirely cold, gently peel the foil sheet away to reveal your design!